Skip to main content

Merchant radar

Merchant radar · E-commerce

EU Packaging Regulation (PPWR) and VerpackDG: producer status

Deadline
Status
applies since 12 August 2026
Date
confirmed
Affects
all online shops, manufacturers
Updated on
Reviewed on

Since 12 August 2026, the PPWR and the VerpackDG have set out which online shops and other businesses count as producers and pay for the recycling of packaging such as shipping boxes.

In short

  • What: The EU Packaging Regulation (PPWR) and Germany's Packaging Law Implementation Act (VerpackDG) govern who is responsible for packaging and pays for its recycling.
  • Who: Online shops packing their own parcels or ordering branded boxes; businesses handing out branded bags. Exception: micro-enterprises with a domestic supplier of branded packaging.
  • Which products: Packaging such as shipping boxes, void fill and paper bags filled at the counter.
  • When: Since 12 August 2026. Some rules, such as labelling, apply later.
  • What to check: Whether you are a producer, in the packaging register and part of a take-back system ("system participation" in German law).

Three terms recur throughout.

  • Placing on the market is the first time packaging is made available on the EU market. In online sales, the Commission's guidance document treats a direct offer to an end user as making the product available in that end user's country.
  • Producer (Hersteller): according to the Zentrale Stelle Verpackungsregister (ZSVR, Central Agency Packaging Register), the business that pays for disposal in the EU country where the packaging becomes waste. The ZSVR is the authority responsible for the German packaging register. The tables below show who the producer is in each case.
  • Manufacturer: according to the ZSVR, the business responsible for making sure the packaging complies with the rules. The Commission's guidance says the manufacturer is not necessarily whoever physically makes the packaging. Two things count: the role in designing or making the packaging, and the trademark or branding it carries.

Does this apply to me?

The table gives typical cases, each with its source.

Typical cases in online retail
Your situationAnswerReason
You pack goods yourself into plain, unbranded boxes with tape and void fill.YesAccording to the ZSVR, a shop that puts together its own shipping packaging is both manufacturer and producer of that packaging. The ZSVR counts boxes, tape and void fill as e-commerce packaging.
You have shipping boxes made with your logo.Yes, even if the supplier is abroadAccording to the ZSVR, a shop that has shipping packaging designed or made with its own name, logo or brand is both manufacturer and producer. This applies whether the seller of the boxes is based in Germany or abroad. For micro-enterprises, see the next table.
You supply individual packaging materials without a customer logo to shops that put the packaging together themselves.No, neither manufacturer nor producerAccording to the ZSVR, a supplier of individual materials such as boxes, tape or void fill is neither manufacturer nor producer. The ZSVR adds that the supplier still has to pass on information and documents to the customer under Article 16 PPWR.
You sell goods under your own brand.As a rule, yesAccording to the ZSVR, a retailer is the manufacturer of its own-brand products and, as a rule, also the producer. This holds even if the company that made the product is named on the packaging. According to the Commission's guidance, there is an exception: if the brand owner is a micro-enterprise and the packaging supplier is in the same EU country, the supplier is the manufacturer.
You add tape or void fill to shipping packaging that was already complete.PossiblyAccording to the ZSVR, the business is then both manufacturer and producer if the addition could affect the packaging's recyclability. For the manufacturer role, the ZSVR relies on Article 21 PPWR.
You ship parcels to business customers.YesAccording to the ZSVR, shipping packaging is assessed separately from the goods inside it, looking at the market as a whole. Shipping packaging sent to large commercial and industrial recipients is therefore also subject to system participation.
You deliver goods in transport packaging by freight forwarder rather than as parcels.As a rule, noAccording to the ZSVR's catalogue of packaging subject to system participation, such transport packaging mostly ends up as waste somewhere other than private households and comparable places. The catalogue therefore treats it as not subject to system participation. Other duties still apply, such as free take-back under section 39 VerpackDG.
You send an envelope containing only an invoice.NoAccording to the Commission's FAQs, invoices and letters do not count as products under the definition of packaging. An envelope containing only such documents is therefore not packaging.

According to the ZSVR, where the activity is commercial, there is no minimum quantity below which the duties fall away, even for micro-enterprises. A few rules do differ, however.

Micro-enterprises and small quantities
GroupWhat differsSource
Who counts as a micro-enterpriseA business with fewer than 10 employees and no more than EUR 2 million in annual turnover or balance sheet total.Commission Recommendation 2003/361/EC, to which the PPWR refers
Micro-enterprises with packaging under their own name, logo or brandAccording to the Commission's guidance, a supplier in the same EU country is the manufacturer. For service packaging such as bakery bags, the ZSVR says that supplier is also the producer. Where an importer or distributor covered by Article 21 PPWR is a micro-enterprise, a supplier anywhere in the EU counts as manufacturer for the manufacturer's duties under Article 15.Article 3(1), point (13)(b), and Article 21 PPWR; Commission's guidance document; ZSVR
Micro-enterprises making no more than 1,000 kg of packaging available in one EU country in a yearExempt from the re-use targets for that calendar year.Article 29(13) PPWR
Micro-enterprises in the hospitality (HORECA) sectorNo duty to offer reusable packaging as an alternative for take-away food and drinks.Article 33(4) PPWR
All producers that made available in Germany less than 10 tonnes of packaging subject to system participation in the previous yearThey report their data once a year, by 1 June, instead of reporting it without undue delay.Section 9(2) VerpackDG
All businesses that made available in Germany in the previous year less than 80 tonnes of glass packaging, less than 50 tonnes of paper, paperboard and cardboard packaging and less than 30 tonnes of packaging of other materials, counting only packaging subject to system participationThey do not have to submit the yearly declaration of completeness. The ZSVR or the competent authority of the federal state can still require one.Section 10(4) VerpackDG

For micro-enterprises, the PPWR refers to Commission Recommendation 2003/361/EC. The VerpackDG's quantity thresholds affect only data reporting and the declaration of completeness. Registration and system participation are still required.

An example

Take a bakery in Germany that hands out rolls in paper bags with its logo. The German version of the Regulation lists bread bags among the items designed to be filled at the point of sale. The PPWR calls such items service packaging. According to the ZSVR's catalogue, the bakery's brand printed on the bag is also one indication that the bag is service packaging.

Producer of the bakery bag
CaseWho is the producerSource
The bakery orders bags with its logo. One business makes the blank bags, and a printer prints them.According to the ZSVR, it is the bakery, as both manufacturer and producer. This applies whether the seller of the bags is based in Germany or abroad. The Commission's guidance also treats a business that clearly brands its service packaging with its name or trademark as the manufacturer. Both sources give this rule for branded packaging; they do not deal with a chain of two suppliers. For micro-enterprises, see the next row.ZSVR page on service packaging; Commission's guidance document
As above, but the bakery is a micro-enterprise and the supplier is in Germany.According to the ZSVR, it is the supplier, as both manufacturer and producer.ZSVR page on service packaging
The bakery buys unbranded bags.According to the explanatory memorandum to the government bill, it is the company that made the bag. With sales packaging, by contrast, the memorandum points to the maker of the packaged product. The memorandum bases this on Article 3(1), point (15), PPWR. Under that provision, producers include a business established in Germany that is the first to make the bags available there.Explanatory memorandum; Article 3(1), point (15), PPWR
The bakery uses unbranded wrapping paper or film off a roll.According to the ZSVR, it is the bakery, as both manufacturer and producer, because it fills or uses the material. This applies whether the bakery buys the material in Germany or abroad.ZSVR page on service packaging
A shop sells empty bags to its customers as goods.Recital 11 says such items should not count as packaging if they are designed and intended to be sold empty by the final distributor. In the German language version, recital 11 names bread bags among these items.Recital 11 PPWR
The bakery wants to leave system participation to its supplier.This is possible only in special cases, under section 7(2) VerpackDG. The condition is that the bakery counts as manufacturer under Article 21 PPWR, for example because it adds its own brand to unbranded bags later. The bakery can then require the upstream distributors that supply the empty bags to join a system for those bags. According to the ZSVR, a further condition is that no manufacturer is based in Germany. The ZSVR says this route is not open for bags ordered with a logo from the start.Section 7(2) VerpackDG; Article 21 PPWR; ZSVR

According to the explanatory memorandum, the VerpackDG no longer offers the old general option of passing system participation for service packaging on to upstream distributors. Under the transitional rule in section 68 VerpackDG, system participation arranged through upstream distributors under the old Packaging Act continues to apply until the end of 31 December 2026 at the latest. According to the ZSVR, the manufacturer and producer duties can shift once someone changes service packaging, for example by adding a label. The authority does not advise on individual cases.

The rules in detail

The PPWR (Packaging and Packaging Waste Regulation) is Regulation (EU) 2025/40 and has applied since 12 August 2026. Germany's VerpackDG entered into force on the same day (Federal Law Gazette, in German). The old Packaging Act ceased to have effect at the end of 11 August 2026. The VerpackDG uses the PPWR's definitions and adds its own. The ZSVR remains in place under the new Act. Its page on mail order and online retail (in German) gives case examples.

Duties and deadlines
TopicWhat appliesWhere it is laid down
Who is the producerProducers include any manufacturer, importer or distributor that is established in an EU country and is the first to make transport or service packaging, or packaged goods, available there. E-commerce packaging counts as transport packaging. Whoever is the first to supply end users in another EU country directly, from inside or outside the EU, is also a producer. So is a business that unpacks packaged goods without being an end user, unless someone else is the producer.Article 3(1), point (15), PPWR; the VerpackDG refers to it
RegistrationProducers register through the ZSVR's electronic system. The ZSVR confirms the registration and gives the producer a registration number.Section 6(3) VerpackDG
System participationProducers of packaging subject to system participation join one or more take-back systems for that packaging. They state its material type and weight and their registration number. Packaging subject to system participation means sales, grouped, primary production and transport packaging that, judged across the whole market, typically ends up as waste mostly in private households or comparable places. It also includes service packaging.Sections 3(6) and 7(1) VerpackDG
Data reportingProducers also send the details they gave the system to the ZSVR, without undue delay.Section 9(1) VerpackDG
Distributors in the supply chainDistributors may not make packaging available if its producer is not registered, or not properly registered. The same applies to packaging subject to system participation whose producer has not joined a system for it.Section 13(3) VerpackDG
Selling to other EU countriesPackaging may not be made available in an EU country for the first time unless the producer or, where applicable, its authorised representative is registered there. A producer that supplies end users in other EU countries directly must appoint, by written mandate, an authorised representative for extended producer responsibility in every EU country where it first makes packaging or packaged products available, except the country where it is established.Article 44(4) and Article 45(3) PPWR
Fulfilment service providersA producer may be asked to correct or complete its registration and extended producer responsibility details. If the producer fails to do so, the fulfilment service provider must swiftly suspend its services for that producer's offers to consumers in the EU. The suspension lasts until the request has been fully met.Article 45(8) PPWR
Old registrationsRegistrations under the old Packaging Act continue to count. Changes to the registration details had to be made by 12 November 2026.Section 68(2) VerpackDG
Producers registering for the first timeProducers required to register for the first time under the VerpackDG had to do so by 12 September 2026.Section 68(2) VerpackDG
Information before purchaseThe harmonised label on material composition applies from 12 August 2028 or later, depending on the implementing acts. The label information must then also be available to end users online before they buy.Article 12(1) and (5) PPWR
Empty space in shippingFrom 1 January 2030, or later depending on the implementing acts, whoever fills e-commerce, transport or grouped packaging must keep the empty space ratio at no more than 50 per cent. Space taken up by filling materials (void fill) counts as empty space. Businesses that use the sales packaging itself as shipping packaging are exempt from the limit. That sales packaging must then meet the packaging minimisation requirements of Article 10.Article 24(1), (3) and (5) PPWR
Packaging in contact with foodSince 12 August 2026, food-contact packaging may not be placed on the market if it contains per- and polyfluorinated alkyl substances (PFAS) at or above the Regulation's limits.Article 5(5) PPWR

What to check

  • Which packaging are you the first to pass on? Examples are shipping boxes and bags, tape, void fill such as paper or air cushions, and bags or carrier bags with a logo; the ZSVR and Annex I of the PPWR list more.
  • Are you registered with the ZSVR, and have you joined a take-back system for your packaging?
  • Have your registration details changed since you registered under the old Packaging Act? The VerpackDG set 12 November 2026 as the deadline for making such changes.
  • Is your business a micro-enterprise, with the supplier of your logo bags or cups in the same EU country? According to the ZSVR, that supplier is then both manufacturer and producer; otherwise your business is both.
  • Do you deliver directly to end users in other EU countries? The PPWR then requires registration and an authorised representative in each of those countries.
  • Does your product page have room for the label information? Under the PPWR, that information must be available online before purchase once the label applies, from 12 August 2028 at the earliest.

Sources

  1. Serviceverpackungen: Was ändert sich durch die PPWR? (opens in a new tab)

    Stiftung Zentrale Stelle Verpackungsregister accessed

  2. Verordnung (EU) 2025/40 über Verpackungen und Verpackungsabfälle (opens in a new tab)

    Amtsblatt der Europäischen Union accessed

  3. Rollen & Pflichten nach PPWR und VerpackDG (opens in a new tab)

    Stiftung Zentrale Stelle Verpackungsregister accessed

  4. Versand- und Onlinehandel: Was ändert sich durch die PPWR? (opens in a new tab)

    Stiftung Zentrale Stelle Verpackungsregister accessed

History

  1. The 50 per cent limit on empty space in e-commerce, transport and grouped packaging applies from this date, or later depending on the implementing acts.
  2. One provision of the PPWR, Article 67(5), applies only from this date.
  3. The harmonised label on material composition applies from this date at the earliest.
  4. System participation arranged under the old Packaging Act, including through upstream distributors, continues to apply until the end of this day at the latest.
  5. Changes to registrations carried over from the old Packaging Act had to be made by this date.
  6. Producers required to register for the first time under the VerpackDG had to do so by this date.
  7. The PPWR and the VerpackDG apply from this date.
  8. The old Packaging Act of 2017 ceased to have effect at the end of this day.
  9. The VerpackDG was published in the Federal Law Gazette on this date.
  10. The VerpackDG forms Article 1 of an Act dated this day.
  11. The PPWR was published in the Official Journal of the European Union.

Thresholds in this entry

Glossary terms

Share on LinkedIn

Guidance, not legal advice: we name the document, the deadline and the primary source, and link to the other relevant sources. What applies in your case is for your legal adviser to judge.

Questions about implementing it in your shop?

We look at what the obligation means technically for your shop system and tell you plainly whether there is anything to build.

Search the website

Popular topics

All results